RTL-SDR pymultimonaprs iGate

by on under hamradio
1 minute read

Installing RTL-SDR pymultimonaprs iGate

I am installing this onto a Ubuntu Server VM.

Three projects involved:

RTL-SDR installation

git clone git://git.osmocom.org/rtl-sdr.git

cd rtl-sdr/

mkdir build

cd build

sudo apt-get install cmake

sudo apt-get install libusb-1.0-0-dev

cmake ../ -DINSTALL_UDEV_RULES=ON -DDETACH_KERNEL_DRIVER=ON

make

sudo make install

sudo ldconfig

multimon-ng installation

git clone https://github.com/EliasOenal/multimon-ng.git

cd multimon-ng/

mkdir build

cd build

cmake ..

// Ignore the pulse audio warning.

make

sudo make install

pymultimonaprs installation

git clone https://github.com/asdil12/pymultimonaprs.git

cd multimon-ng/

sudo apt-get install python-minimal

sudo apt-get install python-pip

sudo pip install setuptools

sudo python2 setup.py install

sudo vim /etc/pymultimonaprs.json

sudo systemctl enable pymultimonaprs.service

sudo systemctl start pymultimonaprs.service

sudo systemctl status pymultimonaprs.service
hamradio, RTL-SDR, SDR, Linux, APRS
comments powered by Disqus